Unun – CQ DE VK7BEN

It’s been a couple of years now since my first post on EFHW Antennas. Notably since then I have acquired a Mini 600 Analyser. Armed with technology it was time to revisit this “no-tune” portable antenna. What followed was 3 months of confusion, learning and experimentation.

Before I go any further I would sincerely like to thank David VK3IL for his patience and assistance over the last 2 weeks in helping me troubleshoot my issues and teach me a bit more about what I was doing along the way.

It all started when I thought it would be a good idea to re-test the end-fed antenna now I have a new analyser as I was preparing ready-to-assemble kits for my local radio club and didn’t want to see people ending up with an antenna that didn’t work as described. To my dismay, the antenna definitely was not working as originally described.

Portable Setup, Mount Direction — Portable on Mount Direction

I went away to the Tasmania’s West Coast in October 2016 and had hoped to work some stations. For radio, the trip was a bit of a disaster with the place we were staying having lots of solar inverter noise. The other thing was that it was very tedious to use a linked dipole in the location I was in. Since that day I had resolved that I would try and end-fed antenna and see how that goes.

The End Fed Half Wave (EFHW) antenna is popular with many QRP Portable stations, particularly for activities such as SOTA or WWFF. The big drawback of the end-fed is the high impedances they have, which means that you need to carry some sort of Antenna tuner to match the impedance with the radio. The thought of lugging around an antenna tuner and then having to retune every time I switched frequency was less than appealing though.

More Experiments with EFHW Antennas – Part 2

Experiments with an End Fed Half Wave Antenna